notizie sull'azienda New Wear Resistant Rubber Conveyor Belt 2106086 Released for W195 W200 W205 W215 Milling Machines

New Wear Resistant Rubber Conveyor Belt 2106086 Released for W195 W200 W205 W215 Road Milling Machines

We have released a new wear resistant rubber conveyor belt, part number 2106086, for the W195, W200, W205 and W215 cold milling machines. The belt is the material discharge belt that carries milled asphalt, concrete and aggregate away from the milling drum, and it is now available from stock with a one piece minimum order quantity.

Discharge belts on milling machines fail from one cause more than any other: abrasion. Hot asphalt spoil, sharp aggregate and constant edge loading wear through an ordinary rubber cover in a short time, and once the cover cuts through to the fabric carcass the belt starts to stretch, track badly and finally split. The new 2106086 belt was developed around that failure mode, and it is built for owners and parts distributors who are tired of replacing the same belt twice a season.

Key Specifications of the 2106086 Discharge Belt

What Makes This Belt Different

• Abrasion resistant rubber cover. The top cover is compounded for hot asphalt spoil and sharp, angular aggregate, so the belt keeps its surface instead of cutting and chunking out under the discharge stream.
• Multi-ply fabric carcass. Several fabric plies are bonded under controlled pressure, which delivers the tensile strength needed for a fully loaded discharge conveyor while keeping the belt flexible around the head and tail pulleys.
• Reinforced edges. Belt edges are the first place a discharge belt starts to fray, especially when the belt misaligns for a few shifts. Both edges on the 2106086 belt are protected to delay that failure.
• Direct part number match. The belt is marked 2106086 to match the W195, W200, W205 and W215 parts book, so the fit is confirmed against your machine serial number before the belt is packed.
• Pre-punched splice holes. The belt arrives ready for the original fasteners, which keeps the replacement window short when a machine is standing on site.

Where the Belt Is Used

The 2106086 belt is used on cold milling machines in highway rehabilitation, airport runway resurfacing, municipal road repair and industrial floor removal. It conveys milled asphalt, concrete and mixed aggregate from the milling drum to the discharge conveyor in continuous operation, and it is a direct replacement for the same position belt removed from the machine.

Supply, Packing and Terms

About Our Production

Our workshops run automatic production lines for rubber parts, screed plates and electronic products, with an annual output of 650,000 track pads. For items outside our own production we act as an OEM supplier, which means a milling machine owner can source the discharge belt, the track pads and the screed plate from one supplier and one shipment. Video technical support is available after delivery, and outgoing inspections with test reports can be provided before shipment.

Ordering the 2106086 Belt

To confirm a fit, send us the machine model (W195, W200, W205 or W215) and the part number from your parts book. We confirm the match, quote FOB Shanghai or CIF against your port, and ship from stock for orders placed with a short delivery window. Contact our sales team for price, sample arrangement and current stock status.

Contact for more info

Manager: Vivi

Tel/WhatsApp: + 86 15250571130

Email: benit5@szbenit.com